Cisco CBS350-24P-4G 24-Port Gigabit PoE+ Managed Switch with SFP (19W)
- Brand: Cisco
- Product Code: CBS350-24P-4G
- Availability: In Stock
Cisco CBS350-24P-4G 24-Port Gigabit PoE+ Managed Switch with SFP (19W)
Cisco Business 350 switch, 24 10/100/1000 PoE+ ports with 195W power budget, 4 Gigabit SFP
Inputs/Outputs: 24 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) PoE+, 4 x 10/100/1000 Mb/s Gigabit SFP, 1 x Micro-USB
Capacity in Millions of Packets per Second (mpps) (64-byte packets): 41.66
Switching Capacity in Gigabits per Second (Gbps): 56.0
Total System Ports: 28 x Gigabit Ethernet
RJ-45 Ports: 24 x Gigabit Ethernet
Combo Ports (RJ45 + Small form-factor pluggable [SFP]): 4 x SFP
Packet Buffer: 1.5 MB
IPv4 routing: Wirespeed routing of IPv4 packets & Up to 990 static routes and up to 128 IP interfaces
IPv6 routing: Wirespeed routing of IPv6 packets
Layer 3 Interface: Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR): Support for classless interdomain routing
RIP v2: Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR): Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server: Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes & Support for DHCP options
DHCP relay at Layer 3: Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay: Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Priority levels: 8 hardware queues
Scheduling: Strict priority and Weighted Round-Robin (WRR)
Rate limiting: Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing
Congestion avoidance: A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization
iSCSI traffic optimization: A mechanism for giving priority to iSCSI traffic over other types of traffic
Energy Detect: Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up
Cable length detection: Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables.
EEE Compliant (802.3az): Supports IEEE 802.3az on all copper Gigabit Ethernet ports
Disable port LEDs: LEDs can be manually turned off to save on energy
Time-based port operation: Link up or down based on user-defined schedule (when the port is administratively up)
Time-based PoE: PoE power can be on or off based on user-defined schedule to save energy
Jumbo frames: Frame sizes up to 9K bytes. The default MTU is 2K bytes
MAC table: 16K addresses
USB slot: USB Type-A slot on the front panel of the switch for easy file and image management
Buttons: Reset button
Cabling type: Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
LEDs: System, Link/Act, PoE, Speed
Flash: 256 MB
CPU: 800 MHz ARM
DRAM: 512 MB
Power Cord (Power adapter for select 8-port and 16-port SKUs) & Mounting Kit & Quick Start Guide
Web browser: Chrome, Firefox, Edge, Safari, Category 5e Ethernet network cable, TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed
Cisco CBS350-24P-4G 24-Port Gigabit PoE+ Managed Switch with SFP (19W)
Cisco Business 350 switch, 24 10/100/1000 PoE+ ports with 195W power budget, 4 Gigabit SFP
Inputs/Outputs: 24 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) PoE+, 4 x 10/100/1000 Mb/s Gigabit SFP, 1 x Micro-USB
Capacity in Millions of Packets per Second (mpps) (64-byte packets): 41.66
Switching Capacity in Gigabits per Second (Gbps): 56.0
Total System Ports: 28 x Gigabit Ethernet
RJ-45 Ports: 24 x Gigabit Ethernet
Combo Ports (RJ45 + Small form-factor pluggable [SFP]): 4 x SFP
Packet Buffer: 1.5 MB
IPv4 routing: Wirespeed routing of IPv4 packets & Up to 990 static routes and up to 128 IP interfaces
IPv6 routing: Wirespeed routing of IPv6 packets
Layer 3 Interface: Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR): Support for classless interdomain routing
RIP v2: Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR): Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server: Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes & Support for DHCP options
DHCP relay at Layer 3: Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay: Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Priority levels: 8 hardware queues
Scheduling: Strict priority and Weighted Round-Robin (WRR)
Rate limiting: Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing
Congestion avoidance: A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization
iSCSI traffic optimization: A mechanism for giving priority to iSCSI traffic over other types of traffic
Energy Detect: Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up
Cable length detection: Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables.
EEE Compliant (802.3az): Supports IEEE 802.3az on all copper Gigabit Ethernet ports
Disable port LEDs: LEDs can be manually turned off to save on energy
Time-based port operation: Link up or down based on user-defined schedule (when the port is administratively up)
Time-based PoE: PoE power can be on or off based on user-defined schedule to save energy
Jumbo frames: Frame sizes up to 9K bytes. The default MTU is 2K bytes
MAC table: 16K addresses
USB slot: USB Type-A slot on the front panel of the switch for easy file and image management
Buttons: Reset button
Cabling type: Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
LEDs: System, Link/Act, PoE, Speed
Flash: 256 MB
CPU: 800 MHz ARM
DRAM: 512 MB
Power Cord (Power adapter for select 8-port and 16-port SKUs) & Mounting Kit & Quick Start Guide
Web browser: Chrome, Firefox, Edge, Safari, Category 5e Ethernet network cable, TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed
Cisco CBS350-24T-4X 24-Port Gigabit Managed Network Switch with 10G SFP+Cisco Business 350 switch, 24 10/100/1000 ports, 4x10 Gigabit SFP+Inputs/Outputs: 24 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45),..
Cisco CBS350-24FP-4G 24-Port Gigabit PoE+ Compliant Managed Switch with SFP (370W)Cisco Business 350 switch, 24 10/100/1000 PoE+ ports with 195W power budget, 4 Gigabit SFPInputs/Outputs: 24 x 10/100/..
Cisco CBS350-48P-4X 48-Port Gigabit PoE+ Compliant Managed Switch with SFP (370W)Cisco Business 350 switch, 48 10/100/1000 PoE+ ports with 370W power budget, 4 10 Gigabit SFP+Inputs/Outputs: 48 x 10/1..
Cisco CBS350-8P-2G 8-Port Gigabit PoE+ Compliant Managed Switch with SFP (67W)Cisco Business 350 switch, 8 10/100/1000 PoE+ ports with 67W power budget, 2 Gigabit copper/SFP combo portsInputs/Outputs:..
